Empire Ears Hero EQ settings
Parametric EQ correction for the Empire Ears Hero, derived from measurements by crinacle. It moves the measured frequency response toward a neutral target.
How the Ears Hero sounds before EQ
Measured against a neutral target, the Ears Hero comes out near-neutral. It already tracks the target closely, so the correction is polish rather than surgery.
The lower mids region, warmth and the body of voices, sits about 1.5 dB behind neutral, so voices lose body and sound hollow. The treble region, cymbals, sibilance and sparkle, sits about 1.4 dB forward of neutral, so cymbals and s-sounds can sting.
The deviations are moderate, topping out around 1.5 dB, which is clearly audible in a direct comparison. EQ makes a worthwhile difference.
These figures are read from the correction itself: whatever the EQ lifts, the headphone lacked, and whatever it cuts, the headphone had too much of. The target is the community's neutral reference, and how far above 10 kHz you can trust any measurement varies by rig. More near-neutral models.
The correction curve
The solid line is the full measured correction (all 10 filters). The dashed line is what Atrium applies: the same shape at 65 percent strength, capped at 6 dB per band, so the headphone keeps its own character instead of being forced flat.
What the EQ fixes
The biggest moves in this correction, and what they do:
- The filter at 3.24 kHz lifts the clarity region by 10.0 dB with a medium-width band (Q 1.78).
- The filter at 1.64 kHz cuts the vocal presence region by 6.5 dB with a broad band (Q 0.25).
- The filter at 920 Hz lifts the middle of the mids by 5.9 dB with a medium-width band (Q 1.20).
The preamp of -4.9 dB offsets the boosts so nothing clips at full volume.
Parametric EQ settings
Preamp: -4.9 dB (prevents clipping from the boosts below)
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low shelf | 105 Hz | -1.2 dB | 0.70 |
| 2 | Peaking | 920 Hz | +5.9 dB | 1.20 |
| 3 | Peaking | 1.64 kHz | -6.5 dB | 0.25 |
| 4 | Peaking | 3.24 kHz | +10.0 dB | 1.78 |
| 5 | Peaking | 519 Hz | +4.6 dB | 0.93 |
| 6 | High shelf | 1 kHz | +0.6 dB | 0.70 |
| 7 | Peaking | 75 Hz | +1.1 dB | 1.74 |
| 8 | Peaking | 146 Hz | -0.7 dB | 1.84 |
| 9 | Peaking | 5.7 kHz | -2.3 dB | 6.00 |
| 10 | Peaking | 5.13 kHz | +1.8 dB | 6.00 |
This is the full measured correction in AutoEq format. It pastes straight into Equalizer APO or Peace on Windows, and into most parametric EQ apps.
How to use these settings
Manually: enter the preamp and each filter into any parametric EQ. On Windows that is usually Equalizer APO with the Peace interface. On a Mac, eqMac or SoundSource. Set the type, frequency, gain and Q exactly as listed.
With Atrium: pick your Ears Hero in the app and it applies a tuned version of this correction: 65 percent strength with a 6 dB per-band cap, which fixes the rough spots without erasing what the headphone does well. Atrium also measures how you hear with a short listening test and layers your personal hearing profile on top. Two people with the same headphones do not hear the same sound. Headphone corrections are part of Signature Edition; the app itself is free.
Ears Hero vs other Empire models
Bass and treble are each model's average distance from the neutral target in that range. Positive means more than neutral, negative means less.
| Model | Signature | Bass vs neutral | Treble vs neutral |
|---|---|---|---|
| Ears Hero (this page) | near-neutral | +0.8 dB | +0.1 dB |
| Ears Bravado | bass-heavy | +6.7 dB | -2.9 dB |
| Ears Bravado Mk2 | bass-heavy | +5.4 dB | -1.3 dB |
| Ears ESR | dark | +0.5 dB | -2.4 dB |
| Ears ESR Mk2 | near-neutral | -1.5 dB | -2.3 dB |
Headphones that sound similar
Closest matches across all 4,332 measured models, by distance between their deviation curves. Useful if you like how the Ears Hero is tuned and want alternatives.