Atrium / Headphone EQ / Xiaomi / Mi ANC

Xiaomi Mi ANC EQ settings

Parametric EQ correction for the Xiaomi Mi ANC, derived from measurements by oratory1990. It moves the measured frequency response toward a neutral target.

How the Mi ANC sounds before EQ

Measured against a neutral target, the Mi ANC comes out bass-light. The low end sits behind neutral, so the sound is lean.

The sub-bass region, rumble and the weight under kick drums, sits about 6.0 dB behind neutral, so kick drums lose their weight. The treble region, cymbals, sibilance and sparkle, sits about 4.9 dB behind neutral, so cymbals sound blunted. The lower mids region, warmth and the body of voices, sits about 3.9 dB forward of neutral, so voices and guitars thicken up. The air region, openness at the very top, sits about 2.9 dB forward of neutral, so the very top sounds airy and open (measurements this high up vary between test rigs, so treat the exact number loosely).

The largest deviation runs to about 6.0 dB, which is impossible to miss. This model benefits clearly from correction.

These figures are read from the correction itself: whatever the EQ lifts, the headphone lacked, and whatever it cuts, the headphone had too much of. The target is the community's neutral reference, and how far above 10 kHz you can trust any measurement varies by rig. More bass-light models.

The correction curve

1001k10k+80-8 full measured correction what Atrium applies

The solid line is the full measured correction (all 10 filters). The dashed line is what Atrium applies: the same shape at 65 percent strength, capped at 6 dB per band, so the headphone keeps its own character instead of being forced flat.

What the EQ fixes

The biggest moves in this correction, and what they do:

The preamp of -6.3 dB offsets the boosts so nothing clips at full volume.

Parametric EQ settings

Preamp: -6.3 dB (prevents clipping from the boosts below)

#TypeFrequencyGainQ
1Low shelf105 Hz+6.2 dB0.70
2Peaking875 Hz-6.3 dB0.55
3Peaking6.07 kHz+8.0 dB0.48
4Peaking3.65 kHz-10.5 dB1.91
5Peaking2.46 kHz+5.2 dB2.49
6High shelf1 kHz-5.6 dB0.70
7Peaking162 Hz+1.6 dB2.33
8Peaking9.46 kHz+3.0 dB3.09
9Peaking342 Hz-1.1 dB2.12
10Peaking592 Hz+0.3 dB1.31

This is the full measured correction in AutoEq format. It pastes straight into Equalizer APO or Peace on Windows, and into most parametric EQ apps.

How to use these settings

Manually: enter the preamp and each filter into any parametric EQ. On Windows that is usually Equalizer APO with the Peace interface. On a Mac, eqMac or SoundSource. Set the type, frequency, gain and Q exactly as listed.

With Atrium: pick your Mi ANC in the app and it applies a tuned version of this correction: 65 percent strength with a 6 dB per-band cap, which fixes the rough spots without erasing what the headphone does well. Atrium also measures how you hear with a short listening test and layers your personal hearing profile on top. Two people with the same headphones do not hear the same sound. Headphone corrections are part of Signature Edition; the app itself is free.

Download Atrium free How Atrium tunes headphones

Mi ANC vs other Xiaomi models

Bass and treble are each model's average distance from the neutral target in that range. Positive means more than neutral, negative means less.

ModelSignatureBass vs neutralTreble vs neutral
Mi ANC (this page)bass-light-4.3 dB-2.6 dB
Crystalbass-heavy+3.1 dB+0.4 dB
Hybridbass-heavy+4.4 dB-3.1 dB
Mi True Wireless Earbuds Basic 2bass-heavy+6.4 dB+1.1 dB
Piston 2bass-heavy+4.7 dB-0.5 dB

Headphones that sound similar

Closest matches across all 4,332 measured models, by distance between their deviation curves. Useful if you like how the Mi ANC is tuned and want alternatives.

More Xiaomi EQ settings