Atrium / Headphone EQ / Xenns / Mangrid Tea PRO

Xenns Mangrid Tea PRO EQ settings

Parametric EQ correction for the Xenns Mangrid Tea PRO, derived from measurements by ToneDeafMonk. It moves the measured frequency response toward a neutral target.

How the Mangrid Tea PRO sounds before EQ

Measured against a neutral target, the Mangrid Tea PRO comes out warm. The low end sits ahead of the treble, which flatters bad recordings and rounds off detail.

The sub-bass region, rumble and the weight under kick drums, sits about 2.0 dB forward of neutral, so kick drums carry extra weight and rumble. The air region, openness at the very top, sits about 1.5 dB forward of neutral, so the very top sounds airy and open (measurements this high up vary between test rigs, so treat the exact number loosely).

The deviations are moderate. The largest single move in the correction is 2.4 dB around 20 Hz, which is clearly audible in a direct comparison. EQ makes a worthwhile difference.

These figures are read from the correction itself: whatever the EQ lifts, the headphone lacked, and whatever it cuts, the headphone had too much of. The target is the community's neutral reference, and how far above 10 kHz you can trust any measurement varies by rig. More warm models.

The correction curve

1001k10k+80-8 full measured correction what Atrium applies

The solid line is the full measured correction (all 10 filters). The dashed line is what Atrium applies: the same shape at 65 percent strength, capped at 6 dB per band, so the headphone keeps its own character instead of being forced flat.

What the EQ fixes

Summed across every filter, these are the changes the correction actually makes, largest first:

The preamp of -1.8 dB offsets the boosts so nothing clips at full volume.

Parametric EQ settings

Preamp: -1.8 dB (headroom for the summed boost, not for any single row)

#TypeFrequencyGainQ
1Low shelf105 Hz-2.5 dB0.70
2Peaking215 Hz-0.8 dB0.30
3Peaking883 Hz+1.2 dB1.39
4Peaking64 Hz+1.6 dB1.13
5Peaking3.32 kHz+1.8 dB3.46
6High shelf10 kHz-1.6 dB0.70
7Peaking5.83 kHz+1.9 dB5.93
8Peaking2.17 kHz-0.6 dB3.52
9Peaking1.49 kHz+0.4 dB3.42
10Peaking4.84 kHz-0.6 dB6.00

This is the published correction for the Mangrid Tea PRO, unaltered, in AutoEq format. It pastes straight into Equalizer APO or Peace on Windows, and into most parametric EQ apps. Enter every row, including the ones that cut. These are the values to use: the numbers are not rounded off or simplified for the page, because changing them would change the result.

How to use these settings

Manually: enter the preamp and each filter into any parametric EQ. On Windows that is usually Equalizer APO with the Peace interface. On a Mac, eqMac or SoundSource. Set the type, frequency, gain and Q exactly as listed.

With Atrium: pick your Mangrid Tea PRO in the app and it applies a tuned version of this correction: 65 percent strength with a 6 dB per-band cap, which fixes the rough spots without erasing what the headphone does well. Atrium also measures how you hear with a short listening test and layers your personal hearing profile on top. Two people with the same headphones do not hear the same sound. Headphone corrections are part of Signature Edition; the app itself is free.

Download Atrium free How Atrium tunes headphones

Mangrid Tea PRO vs other Xenns models

Bass and treble are each model's average distance from the neutral target in that range. Positive means more than neutral, negative means less.

ModelSignatureBass vs neutralTreble vs neutral
Mangrid Tea PRO (this page)warm+1.5 dB-0.2 dB
Mangird Teawarm+0.7 dB-1.3 dB
Mangird Tea Pro 2024warm+1.5 dB-1.2 dB
Mangird Tea2dark+1.0 dB-3.0 dB
Mangird Topbass-heavy+2.7 dB-1.4 dB

Headphones that sound similar

Closest matches across all 4,332 measured models, by distance between their deviation curves. Useful if you like how the Mangrid Tea PRO is tuned and want alternatives.

More Xenns EQ settings