Razer BlackShark V2 X EQ settings
Parametric EQ correction for the Razer BlackShark V2 X, derived from measurements by crinacle. It moves the measured frequency response toward a neutral target.
How the BlackShark V2 X sounds before EQ
Measured against a neutral target, the BlackShark V2 X comes out bass-heavy. The low end dominates the tuning and can mask the mids.
The bass region, punch and bass lines, sits about 7.3 dB forward of neutral, so bass lines carry extra weight. The presence region, vocal clarity and attack, sits about 4.6 dB behind neutral, so detail and clarity soften. The sub-bass region, rumble and the weight under kick drums, sits about 4.5 dB forward of neutral, so kick drums carry extra weight and rumble. The treble region, cymbals, sibilance and sparkle, sits about 3.4 dB behind neutral, so cymbals sound blunted.
The largest deviation runs to about 7.3 dB, which is impossible to miss. This model benefits clearly from correction.
These figures are read from the correction itself: whatever the EQ lifts, the headphone lacked, and whatever it cuts, the headphone had too much of. The target is the community's neutral reference, and how far above 10 kHz you can trust any measurement varies by rig. More bass-heavy models.
The correction curve
The solid line is the full measured correction (all 10 filters). The dashed line is what Atrium applies: the same shape at 65 percent strength, capped at 6 dB per band, so the headphone keeps its own character instead of being forced flat.
What the EQ fixes
The biggest moves in this correction, and what they do:
- The filter at 158 Hz cuts the upper bass by 13.0 dB with a medium-width band (Q 0.91).
- The filter at 808 Hz cuts the middle of the mids by 10.8 dB with a broad band (Q 0.68).
- The filter at 825 Hz lifts the middle of the mids by 8.9 dB with a broad band (Q 0.18).
The preamp of -5.6 dB offsets the boosts so nothing clips at full volume.
Parametric EQ settings
Preamp: -5.6 dB (prevents clipping from the boosts below)
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low shelf | 105 Hz | -3.9 dB | 0.70 |
| 2 | Peaking | 158 Hz | -13.0 dB | 0.91 |
| 3 | Peaking | 825 Hz | +8.9 dB | 0.18 |
| 4 | Peaking | 7.6 kHz | +3.5 dB | 3.10 |
| 5 | Peaking | 808 Hz | -10.8 dB | 0.68 |
| 6 | High shelf | 1 kHz | +0.5 dB | 0.70 |
| 7 | Peaking | 312 Hz | +3.1 dB | 3.28 |
| 8 | Peaking | 477 Hz | -1.6 dB | 2.83 |
| 9 | Peaking | 4.28 kHz | +1.7 dB | 4.98 |
| 10 | Peaking | 216 Hz | -1.8 dB | 3.70 |
This is the full measured correction in AutoEq format. It pastes straight into Equalizer APO or Peace on Windows, and into most parametric EQ apps.
How to use these settings
Manually: enter the preamp and each filter into any parametric EQ. On Windows that is usually Equalizer APO with the Peace interface. On a Mac, eqMac or SoundSource. Set the type, frequency, gain and Q exactly as listed.
With Atrium: pick your BlackShark V2 X in the app and it applies a tuned version of this correction: 65 percent strength with a 6 dB per-band cap, which fixes the rough spots without erasing what the headphone does well. Atrium also measures how you hear with a short listening test and layers your personal hearing profile on top. Two people with the same headphones do not hear the same sound. Headphone corrections are part of Signature Edition; the app itself is free.
BlackShark V2 X vs other Razer models
Bass and treble are each model's average distance from the neutral target in that range. Positive means more than neutral, negative means less.
| Model | Signature | Bass vs neutral | Treble vs neutral |
|---|---|---|---|
| BlackShark V2 X (this page) | bass-heavy | +5.9 dB | -4.0 dB |
| Barracuda | near-neutral | +0.0 dB | -0.7 dB |
| Barracuda Pro | bright | -0.5 dB | +1.6 dB |
| Barracuda X | bass-heavy | +5.0 dB | -2.9 dB |
| BlackShark V2 | bright | -2.4 dB | +2.1 dB |
Headphones that sound similar
Closest matches across all 4,332 measured models, by distance between their deviation curves. Useful if you like how the BlackShark V2 X is tuned and want alternatives.