Ostry KC06A EQ settings
Parametric EQ correction for the Ostry KC06A, derived from measurements by Hi End Portable. It moves the measured frequency response toward a neutral target.
How the KC06A sounds before EQ
Measured against a neutral target, the KC06A comes out bass-heavy. The low end dominates the tuning and can mask the mids.
The bass region, punch and bass lines, sits about 4.1 dB forward of neutral, so bass lines carry extra weight. The presence region, vocal clarity and attack, sits about 3.6 dB behind neutral, so detail and clarity soften. The mids region, vocals and most instruments, sits about 2.2 dB behind neutral, so vocals sit behind the instruments. The treble region, cymbals, sibilance and sparkle, sits about 1.8 dB forward of neutral, so cymbals and s-sounds can sting.
The largest deviation runs to about 4.1 dB, which is impossible to miss. This model benefits clearly from correction.
These figures are read from the correction itself: whatever the EQ lifts, the headphone lacked, and whatever it cuts, the headphone had too much of. The target is the community's neutral reference, and how far above 10 kHz you can trust any measurement varies by rig. More bass-heavy models.
The correction curve
The solid line is the full measured correction (all 10 filters). The dashed line is what Atrium applies: the same shape at 65 percent strength, capped at 6 dB per band, so the headphone keeps its own character instead of being forced flat.
What the EQ fixes
The biggest moves in this correction, and what they do:
- The filter at 3.98 kHz lifts the clarity region by 8.3 dB with a medium-width band (Q 1.13).
- The filter at 6.08 kHz cuts the sibilance range by 6.1 dB with a medium-width band (Q 1.32).
- The filter at 169 Hz cuts the upper bass by 5.3 dB with a broad band (Q 0.56).
The preamp of -6.3 dB offsets the boosts so nothing clips at full volume.
Parametric EQ settings
Preamp: -6.3 dB (prevents clipping from the boosts below)
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low shelf | 105 Hz | -0.4 dB | 0.70 |
| 2 | Peaking | 169 Hz | -5.3 dB | 0.56 |
| 3 | Peaking | 3.98 kHz | +8.3 dB | 1.13 |
| 4 | Peaking | 752 Hz | +3.1 dB | 0.94 |
| 5 | Peaking | 6.08 kHz | -6.1 dB | 1.32 |
| 6 | High shelf | 1 kHz | -0.7 dB | 0.70 |
| 7 | Peaking | 7.04 kHz | +3.3 dB | 5.85 |
| 8 | Peaking | 9.05 kHz | -1.4 dB | 2.09 |
| 9 | Peaking | 5.95 kHz | -2.9 dB | 6.00 |
| 10 | Peaking | 5.05 kHz | +1.6 dB | 4.81 |
This is the full measured correction in AutoEq format. It pastes straight into Equalizer APO or Peace on Windows, and into most parametric EQ apps.
How to use these settings
Manually: enter the preamp and each filter into any parametric EQ. On Windows that is usually Equalizer APO with the Peace interface. On a Mac, eqMac or SoundSource. Set the type, frequency, gain and Q exactly as listed.
With Atrium: pick your KC06A in the app and it applies a tuned version of this correction: 65 percent strength with a 6 dB per-band cap, which fixes the rough spots without erasing what the headphone does well. Atrium also measures how you hear with a short listening test and layers your personal hearing profile on top. Two people with the same headphones do not hear the same sound. Headphone corrections are part of Signature Edition; the app itself is free.
Headphones that sound similar
Closest matches across all 4,332 measured models, by distance between their deviation curves. Useful if you like how the KC06A is tuned and want alternatives.