Atrium / Headphone EQ / JM / Audio Editions XTC^2.5 Closed

JM Audio Editions XTC^2.5 Closed EQ settings

Parametric EQ correction for the JM Audio Editions XTC^2.5 Closed, derived from measurements by Super Review. It moves the measured frequency response toward a neutral target.

How the Audio Editions XTC^2.5 Closed sounds before EQ

Measured against a neutral target, the Audio Editions XTC^2.5 Closed comes out bright. Treble sits ahead of the bass, which reads as detail at first and fatigue over time.

The presence region, vocal clarity and attack, sits about 3.5 dB forward of neutral, so consonants and attack can turn sharp. The lower mids region, warmth and the body of voices, sits about 1.8 dB behind neutral, so voices lose body and sound hollow. The bass region, punch and bass lines, sits about 1.7 dB forward of neutral, so bass lines carry extra weight. The air region, openness at the very top, sits about 1.4 dB behind neutral, so the very top closes in (measurements this high up vary between test rigs, so treat the exact number loosely).

The largest single move in the correction is 13.7 dB around 5.4 kHz, on top of a broad tilt of up to 3.5 dB. That is not subtle. This model benefits clearly from correction.

These figures are read from the correction itself: whatever the EQ lifts, the headphone lacked, and whatever it cuts, the headphone had too much of. The target is the community's neutral reference, and how far above 10 kHz you can trust any measurement varies by rig. More bright models.

The correction curve

1001k10k+140-14 full measured correction what Atrium applies

The solid line is the full measured correction (all 10 filters). The dashed line is what Atrium applies: the same shape at 65 percent strength, capped at 6 dB per band, so the headphone keeps its own character instead of being forced flat.

What the EQ fixes

Summed across every filter, these are the changes the correction actually makes, largest first:

The preamp of -6.2 dB offsets the boosts so nothing clips at full volume.

Parametric EQ settings

Preamp: -6.2 dB (headroom for the summed boost, not for any single row)

#TypeFrequencyGainQ
1Low shelf105 Hz+5.0 dB0.70
2Peaking301 Hz+10.4 dB0.89
3Peaking90 Hz-8.1 dB0.36
4Peaking637 Hz-5.2 dB1.69
5Peaking5.42 kHz-13.8 dB5.64
6High shelf10 kHz+1.6 dB0.70
7Peaking2.73 kHz-4.0 dB4.08
8Peaking1.45 kHz+1.9 dB2.23
9Peaking3.53 kHz+2.9 dB6.00
10Peaking951 Hz-0.9 dB2.69

This is the published correction for the Audio Editions XTC^2.5 Closed, unaltered, in AutoEq format. It pastes straight into Equalizer APO or Peace on Windows, and into most parametric EQ apps. Enter every row, including the ones that cut. These are the values to use: the numbers are not rounded off or simplified for the page, because changing them would change the result.

How to use these settings

Manually: enter the preamp and each filter into any parametric EQ. On Windows that is usually Equalizer APO with the Peace interface. On a Mac, eqMac or SoundSource. Set the type, frequency, gain and Q exactly as listed.

With Atrium: pick your Audio Editions XTC^2.5 Closed in the app and it applies a tuned version of this correction: 65 percent strength with a 6 dB per-band cap, which fixes the rough spots without erasing what the headphone does well. Atrium also measures how you hear with a short listening test and layers your personal hearing profile on top. Two people with the same headphones do not hear the same sound. Headphone corrections are part of Signature Edition; the app itself is free.

Download Atrium free How Atrium tunes headphones

Headphones that sound similar

Closest matches across all 4,332 measured models, by distance between their deviation curves. Useful if you like how the Audio Editions XTC^2.5 Closed is tuned and want alternatives.

More JM EQ settings