Hidizs ST2 Pro EQ settings
Parametric EQ correction for the Hidizs ST2 Pro, derived from measurements by Hi End Portable. It moves the measured frequency response toward a neutral target.
How the ST2 Pro sounds before EQ
Measured against a neutral target, the ST2 Pro comes out warm. The low end sits ahead of the treble, which flatters bad recordings and rounds off detail.
The bass region, punch and bass lines, sits about 3.2 dB forward of neutral, so bass lines carry extra weight. The mids region, vocals and most instruments, sits about 2.8 dB behind neutral, so vocals sit behind the instruments.
The largest deviation runs to about 3.2 dB, which is impossible to miss. This model benefits clearly from correction.
These figures are read from the correction itself: whatever the EQ lifts, the headphone lacked, and whatever it cuts, the headphone had too much of. The target is the community's neutral reference, and how far above 10 kHz you can trust any measurement varies by rig. More warm models.
The correction curve
The solid line is the full measured correction (all 10 filters). The dashed line is what Atrium applies: the same shape at 65 percent strength, capped at 6 dB per band, so the headphone keeps its own character instead of being forced flat.
What the EQ fixes
The biggest moves in this correction, and what they do:
- The filter at 78 Hz cuts the bass punch region by 6.6 dB with a broad band (Q 0.26).
- The filter at 105 Hz lifts the bass punch region by 6.0 dB with a shelf.
- The filter at 765 Hz lifts the middle of the mids by 4.1 dB with a medium-width band (Q 0.84).
The preamp of -3.6 dB offsets the boosts so nothing clips at full volume.
Parametric EQ settings
Preamp: -3.6 dB (prevents clipping from the boosts below)
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low shelf | 105 Hz | +6.0 dB | 0.70 |
| 2 | Peaking | 765 Hz | +4.1 dB | 0.84 |
| 3 | Peaking | 78 Hz | -6.6 dB | 0.26 |
| 4 | Peaking | 8.78 kHz | -3.3 dB | 3.93 |
| 5 | Peaking | 2.44 kHz | +2.0 dB | 0.86 |
| 6 | High shelf | 1 kHz | +0.6 dB | 0.70 |
| 7 | Peaking | 6.27 kHz | +2.6 dB | 5.30 |
| 8 | Peaking | 4.55 kHz | -1.6 dB | 4.24 |
| 9 | Peaking | 7.42 kHz | -1.9 dB | 5.97 |
| 10 | Peaking | 5.67 kHz | +1.0 dB | 5.99 |
This is the full measured correction in AutoEq format. It pastes straight into Equalizer APO or Peace on Windows, and into most parametric EQ apps.
How to use these settings
Manually: enter the preamp and each filter into any parametric EQ. On Windows that is usually Equalizer APO with the Peace interface. On a Mac, eqMac or SoundSource. Set the type, frequency, gain and Q exactly as listed.
With Atrium: pick your ST2 Pro in the app and it applies a tuned version of this correction: 65 percent strength with a 6 dB per-band cap, which fixes the rough spots without erasing what the headphone does well. Atrium also measures how you hear with a short listening test and layers your personal hearing profile on top. Two people with the same headphones do not hear the same sound. Headphone corrections are part of Signature Edition; the app itself is free.
ST2 Pro vs other Hidizs models
Bass and treble are each model's average distance from the neutral target in that range. Positive means more than neutral, negative means less.
| Model | Signature | Bass vs neutral | Treble vs neutral |
|---|---|---|---|
| ST2 Pro (this page) | warm | +1.2 dB | -0.3 dB |
| MD4 (on-on) | near-neutral | -1.4 dB | -2.4 dB |
| Mermaid MM2 (bass filter) | bass-heavy | +2.4 dB | -3.2 dB |
| Mermaid MS1 | bass-heavy | +2.5 dB | -1.7 dB |
| Mermaid MS4 | warm | +1.2 dB | -1.6 dB |
Headphones that sound similar
Closest matches across all 4,332 measured models, by distance between their deviation curves. Useful if you like how the ST2 Pro is tuned and want alternatives.