Baseus M2s EQ settings

Parametric EQ correction for the Baseus M2s, derived from measurements by Regan Cipher. It moves the measured frequency response toward a neutral target.

How the M2s sounds before EQ

Measured against a neutral target, the M2s comes out near-neutral. It already tracks the target closely, so the correction is polish rather than surgery.

The air region, openness at the very top, sits about 5.3 dB behind neutral, so the very top closes in (measurements this high up vary between test rigs, so treat the exact number loosely). The treble region, cymbals, sibilance and sparkle, sits about 3.5 dB behind neutral, so cymbals sound blunted. The presence region, vocal clarity and attack, sits about 2.2 dB forward of neutral, so consonants and attack can turn sharp. The lower mids region, warmth and the body of voices, sits about 1.4 dB behind neutral, so voices lose body and sound hollow.

The largest single move in the correction is 6.0 dB around 9.4 kHz, on top of a broad tilt of up to 3.5 dB. That is not subtle. This model benefits clearly from correction.

These figures are read from the correction itself: whatever the EQ lifts, the headphone lacked, and whatever it cuts, the headphone had too much of. The target is the community's neutral reference, and how far above 10 kHz you can trust any measurement varies by rig. More near-neutral models.

The correction curve

The solid line is the full measured correction (all 10 filters). The dashed line is what Atrium applies: the same shape at 65 percent strength, capped at 6 dB per band, so the headphone keeps its own character instead of being forced flat.

What the EQ fixes

Summed across every filter, these are the changes the correction actually makes, largest first:

• Around 9.4 kHz the correction lifts the treble by 6.0 dB, over a medium-width band about 1.3 octaves wide.
• At the bottom of the range the correction lifts everything below roughly 28 Hz by up to 3.3 dB.
• Around 4.5 kHz the correction cuts the sibilance range by 2.8 dB, over a medium-width band about 1.2 octaves wide.

The preamp of -6.2 dB offsets the boosts so nothing clips at full volume.

Parametric EQ settings

This is the published correction for the M2s, unaltered, in AutoEq format. It pastes straight into Equalizer APO or Peace on Windows, and into most parametric EQ apps. Enter every row, including the ones that cut. These are the values to use: the numbers are not rounded off or simplified for the page, because changing them would change the result.

How to use these settings

Manually: enter the preamp and each filter into any parametric EQ. On Windows that is usually Equalizer APO with the Peace interface. On a Mac, eqMac or SoundSource. Set the type, frequency, gain and Q exactly as listed.

With Atrium: pick your M2s in the app and it applies a tuned version of this correction: 65 percent strength with a 6 dB per-band cap, which fixes the rough spots without erasing what the headphone does well. Atrium also measures how you hear with a short listening test and layers your personal hearing profile on top. Two people with the same headphones do not hear the same sound. Headphone corrections are part of Signature Edition; the app itself is free.

M2s vs other Baseus models

Bass and treble are each model's average distance from the neutral target in that range. Positive means more than neutral, negative means less.

Headphones that sound similar

Closest matches across all 4,332 measured models, by distance between their deviation curves. Useful if you like how the M2s is tuned and want alternatives.

More Baseus EQ settings